ELECTRONIC LOCK GUIDANCE

TO OPEN:
The personal code of this safe has been sat (programmed in) at factory in the sequence numbers (START) 1, 2, 3, 4, 5, 6. Push 1, 2, 3, 4, 5, and 6 continuously. You will hear beep sound. then turn handle to clockwise to open safe.
TO CLOSE:
Turn handle to clockwise (it will be closed automatically in 5 second after open the lock).
CAUTION:

1. Please be careful when you select a number which is not being zero (0) to first number. Number of zero breaks the lock mechanism which is first row. This failure is out of the guaranty.
2. Please follow instructions continuously as below. If you get pause more than 5 seconds, you old password will be back. Lock mechanism will not accept new password and it will be protected by itself. You can open your safe after 15 minutes with your old password.

TO GET NEW CODE:

1. Open the safe. Turn the handle left while the safe’s door is open.
2. Push 0,0,0,0,0,0 (six times) continuously.
3. You will hear beep sound twice.
4. Push your old password (1,2,3,4,5,6)
5. You will hear beep sound twice.
6. Push your new password (it should be 6 digits; ex. 7,8,4,2,0,1)
7. You will hear beep sound twice.
8. Push your new password again.
9. You will hear beep sound twice. It means ok to change for changed your password. If your lock mechanism does not accept new password, it will be back your old password automatically.
10. Be careful not to close the safe until the new has been entered, once you have changed it, only you must know the new code. Try the new code before locking the safe.